478(W) x 632(D) x 748(H) mm
50 liters (1.8 cu.ft.)
Sterilization Temperature 115 °C to 135 °C
상품이미지 최대 사이즈
  • 상품이미지 1
  • HMS
상품 정보 표
판매가격 1
제조사/원산지 PHC corporation/일본
  • - +
    1원 X
총 합계금액 1
상품상세 배너
  • 상품상세설명
  • 고객상품평
  • 상품문의
  • 배송/취소/교환안내




콤팩트 디자인의 이동형 멸균기

Large-mouth 370mm-diameter chamber capacity with small installation space.
Surprisingly large chamber

Despite the compact outer dimensions of these autoclaves, they store 8 (MLS-3751/ 3751L) or 12 (MLS-3781/3781L) 1,000ml flasks. The MLS-3751/3751L has two baskets, and the larger MLS-3781/3781L has three.

Compact design, swing-up lid for easy access

Both Panasonic models can be easily installed in minimal space. A swing-up lid provides effortless access for loading and unloading test tubes, flasks and lab instruments.

Voice Guidance Function Increases Safety to Prevent Operating Mistakes and Increase Carefulness.

Standard mode

For safe use of the product, precautions and operating instructions are given by voice guidance.

Warning mode

If a safety device is activated during use and the product stops operation, the voice guidance will inform users of verification/inspection items. In addition, messages urging periodic maintenance are also provided.

Newly Designed Handle Lets Users Open and Close the Lid Easily with One Hand.

The conventional slide handle has been completely redesigned to develop a hand-pull system that enables easy opening/closing by gripping with one hand. In addition, the cover is equipped with a scalding prevention guard to prevent scalding due to steam.

Plus a Wealth of Other Important Features

Standard mode

Functions for user safety and cooling fan/exhaust level adjustment to reduce cooling time.
Conforming to the requirements of IEC standards, when using sterilizing liquid the temperature when opening the cover is set to 65°C or less.
In addition, by adding exhaust holes at several positions on the side of the product and positioning the standardequipment cooling fan under the chamber, cooing efficiency and sterilizing efficiency are increased, so that operating time can be reduced. Furthermore, a constant open/close interval (with 5-step adjustment) for the exhaust process valve enables selection of the exhaust rate for steam inside the chamber to enable cooling in a shorter time while reducing exhaust time and preventing boiling over of sterilizing liquid.

Thermal printer (optional)

The work conditions shown on the control panel (temperature/pressure inside chamber, sterilizing course, time) can be printed out by a line thermal dot printer for record-keeping, management, and storage.

Microprocessor temperature control

Sterilizing temperature is controlled to within +2°C/-0°C of the set temperature in the range of 115°C to 135°C.

Air vent control

Can be set to allow automatic release after sterilizing is completed.

  • Compact design, swing-up door for easy access
  • Surprisingly large chamber
  • Alarm & safety devices
  • Micorprocessor temperature control
  • Innovative voice guidance function


External Dimensions478 x 632 x 748 (mm) / 18.8 x 24.9 x 29.4 (inch)
Effective Capacity50 liters (1.8 cu.ft.)
Chamber Dimensionø 370 x 415 (mm) / ø 14.6 x 16.3 (inch) Effective chamber height including recess in lid : 463 mm (18.2 inch)
Chamber MaterialSUS 304 (Austenitic stainless steel)
The Lid-
Sterilization Temperature115 °C to 135 °C
Culture Medium Melting Temperature60 °C to 114 °C
Keep Warm Temperature45 °C to 60 °C
Temperature DisplayDigital display
Pressure Gauge-
Max. Pressure0.240 MPa [34.8 psi]
Safety Valve Release Pressure-
Sterilization Timer1 minute to 300 minutes
Keep Warm Timer72 hrs. fixed
Program Timer1 week (Designation: Year, month, day, hour and minute)
Time Sterilization-
Time Heat Insulation-
Water Injection-
Water Drainage-
Exhaust Tank2 -liter polyethylene tank
Safety DevicePressure safety valve, over-temperature limiter, anti-scorch limiter, door interlock, over-pressure limiter, current fuse
Power Consumption1.9 kW (120 V only), 2 kW
Net Weight61 kg (134 lbs.)
AccessoriesStainless steel baskets – Large: 1, small: 1 Drain hose: 1, Exhaust tank: 1, tank mounting bracket: 1 and tip-resistant metals: 2
Effective chamber height including recess in lid463 mm (18.2 inch)
Exhaust ControlExhaust valve open temperature setting
  • •Appearance and specifications are subject to change without notice.
  • *1 Exterior dimensions of main cabinet only - see dimension drawings showing handles and other external projections.

고객 상품평

0개가 있습니다.

상품을 구매하신 회원님께서는 상품평을 작성해주세요. 상품평 작성하기

등록 된 상품평이 존재하지 않습니다.


0개가 있습니다.

상품과 관련된 문의를 남겨주시면 답변을 드립니다. 상품 문의하기

등록 된 상품문의가 존재하지 않습니다.


재고가 있는 제품의 경우, 평일 오후 4시 이전 결제 완료시 당일 출고됩니다.
배송까지는 택배사의 상황에 따라 1~2일 이상 소요될 수 있습니다.
판매금액 기준 100,000원 이상부터 무료  배송입니다.
교환 및 반품을 위해서는 왕복택배비 6,000원을 동봉하여 거래명세표와 함께 물건을 보내주시기 바랍니다.
자세한 문의는 고객센터 02-508-1408로 전화 부탁드립니다.

배송조회를 하시려면 송장번호를 클릭하세요