770(W) x 870(D) x 1990(H) mm
519 liters (18.3 cu.ft.)
Cooling Performance: -86℃
상품이미지 최대 사이즈
  • 상품이미지 1
  • HMS
상품 정보 표
판매가격 1
제조사/원산지 PANASONIC/일본
  • - +
    1원 X
총 합계금액 1
상품상세 배너
  • 상품상세설명
  • 고객상품평
  • 상품문의
  • 배송/취소/교환안내


카다로그 다운로드


궁극적 샘플보호를 위한 이중냉각 시스템

Secure storage with new dual cooling system

The Dual Cooling System is newly designed to securely store valuable biological samples. It consists of two individual compressors to provide a reliable -86˚C ultra-low temperature environment. Should unexpected failure occur in one cooling circuit, the other will maintain at least -65˚C.

*Any unexpected failure on either of the single compressor will be alerted.
*The data is a measured example (AT23˚C, 230V/ 50Hz, no load.) Actual power consumption will vary depending on set and ambient conditions loading and local voltage.

Intelligent ECO mode operation

“ECO mode” is an industry first feature. The two compressors, A and B, are independently controlled to optimise operation efficiently to minimise energy consumption by monitoring freezer load status.

*Ambient temperature at 30˚C (-80˚C) *ECO mode’s wave doesn’t settle into pattern. It draws various pattern depends on SV, AT, and usage condition. *The data is a measured example (AT23˚C, 230V/ 50Hz, no load.) Actual power consumption will vary depending on set and ambient conditions loading and local voltage.

Graphic control panel

Central LCD display control panel enhances operability and visibility. Data log function retains operation data for a preset period and the data can be directly transmitted to a PC via MTR-480-PW interface.
*A software must be installed on PC to receive the log data transmission.

The microprocessor has a memory back-up so after a power failure, operation resumes at pre-outage settings. The self diagnostics function will display an error code in the case of abnormality

Data management by logging function
Pass word access
Error messages
High efficiency insulation using V.I.P. technology
MDF-U500VX is equipped with a 6 times stronger thermal resistance VIP PLUS while keeping the same wall thickness but with more rigid foam polyurethane.
User-friendly design

Various alarms including high/low temperatures, door ajar, power failure alarm and part replacement notification help to keep samples safe even in an emergency.

Installation space
The VIP panel reduced the cabinet wall thickness from 140mm to 70mm and achieved nearly 30% more storage capacity than conventionally insulated freezers, all without increasing its footprint.
Improved air seal heat resistance structure

To allow the eco mode, and to reduce the frosting, the chamber has a well sealed structure.

Status Alert

Unconventional operation can cause malfunctions. Function control monitor notifies the unconventional operation to prevent the problems and helps the safe operation.
It always monitors the operation, and the flash lamp notifies the drops in the voltage, an abnormality of the temperature rise when the ambient temp is over 35˚C, lower than approximately 0˚C,and overload operation. It also notifies the time of battery replacement, and the door status.
The status of these alarms and indicators will be shown on the control panel.

Vacuum release port

The vacuum release port allows smooth door openings. The door seal is tightened by a negative pressure generated from the temperature difference between inside the chamber and the ambient environment.

*If the port is kept open, the air intake hole get frozen and clogged, and will not allow the door to open smoothly. We recommend to keep it closed unless it is neccessory.
Door latch

The outer door latch closes smoothly with a single-hand action over a cam action bearing. The outer door can be secured with an independent padlock provided by customer.

Maintenance-free filterless design

Filterless Construction eliminates bothersome filter cleaning.

  • Dual cooling system
  • Intelligent ECO mode operation
  • Maximised capacity with VIP PLUS Technology
  • Maintenance-free Filterless design


External Dimensions770 x 870 x 1990 (mm) / 30.3 x 34.3 x 78.3 (inch)
Internal Dimensions630 x 600 x 1380 (mm) / 24.8 x 23.6 x 54.3 (inch)
Effective Capacity519 liters (18.3 cu.ft.)
Exterior CabinetPainted steel
Internal CabinetPainted steel
DoorsPainted steel
InsulationVacuum insulation panel + Rigid polyurethane foamed-in place
Shelves3 pcs, stainless steel tray
Access Ports17 mm diameter, 3 locations (back, bottom left / right corner)
Net WeightApprox. 320 kg (705 lbs.)
Compressor2 compressors, hermetic 1100 W
EvaporatorTube on sheet type
CondenserFinless tube type
Temperature Control Range– 50 °C to – 86 °C (in 1 °C increments)
Temperature DisplayDigital Display
AlarmsHigh / low temperature, Door ajar, Power failure, Remote alarm contact, Part replacement notification, Fan lock alarm, Refrigeration circuit abnormal alarm,Remote alarm contact (Allowable contact capacity: DC 30 V, 2 A)
Accessories1 scraper / Vacuum release port cleaning gear, 1 set of keys
*Cooling performance is indicated by the temperature reached at the center of the freezer (at ambient temperature of 30°C with no load).
In order to use the freezer at a stable temperature for a long time, it is recommended that the temperature be set to at least 5°C higher than the indicated lowest temperature. In addition, depending on the usage conditions, it may not be possible to reach the indicated lowest temperature.
Caution: Panasonic guarantees the product under certain warranty conditions. Panasonic in no way shall be responsible for any loss of content or damage to content.
• Appearance and specifications are subject to change without notice.
*1 Exterior dimensions of main cabinet only - see dimension drawings showing handles and other external projections.

고객 상품평

0개가 있습니다.

상품을 구매하신 회원님께서는 상품평을 작성해주세요. 상품평 작성하기

등록 된 상품평이 존재하지 않습니다.


0개가 있습니다.

상품과 관련된 문의를 남겨주시면 답변을 드립니다. 상품 문의하기

등록 된 상품문의가 존재하지 않습니다.


재고가 있는 제품의 경우, 평일 오후 4시 이전 결제 완료시 당일 출고됩니다.
배송까지는 택배사의 상황에 따라 1~2일 이상 소요될 수 있습니다.
판매금액 기준 100,000원 이상부터 무료  배송입니다.
교환 및 반품을 위해서는 왕복택배비 6,000원을 동봉하여 거래명세표와 함께 물건을 보내주시기 바랍니다.
자세한 문의는 고객센터 02-508-1408로 전화 부탁드립니다.

배송조회를 하시려면 송장번호를 클릭하세요